Cannon Printer

Error 5700 or ##356 on Canon printers The 5700 error code is a ASF cam error. ASF Cam Sensor Error. When this occurs, the gears cannot rotate properly causing a grinding noise and 5 alternating blinks (SFP) or ##356 Solution: Step 1: Remove the Left and Right Covers and the Main Case Unit (main cover) Step 2: Remove the 4 mounting screws from the Chassis. Step 3: Remove the Main Unit from the Bottom Case. Step 4: Turn the Main Unit over (upside down) and place on work surface. Step 5: Inspect the ASF section of the Main Unit for a gap between the white plastic guide and the Chassis. The size of the gap varies. Even if the gap is not visible, complete the steps below. Step 6: Disc connect the appropriate cables and remove the Logic Board from the Chassis. Step 7: Loosen (do not remove) the 4 mounting screws (the mounting screws can be found behind the logic board) on the Chassis. Step 8: Re-seat the white plastic guide so it sits flush against the Chassis. The tip...

Cannon Printer 1000 and 1001 error solution 1000 - Orange light blinking 2 times Description: There is no paper in the rear paper tray at the back of the printer. Resolution: 1. Insert paper into the rear tray. 2. Press the [Resume/Cancel] button on the device to continue. If the above solution has not resolved your error, please contact us +1-855-517-2433 Canon authorised service facility. 1001 - Orange light blinking 2 times Description: No CD/DVD Tray is inserted within the printer. Resolution: 1. Open the paper output tray on the front of the device. 2. Place the CD/DVD (with the printable surface facing up) onto the CD/DVD tray NOTE: Make sure that there is no dirt on the CD/DVD tray 3. Insert the CD/DVD tray within the inner cover, ensuring the tray is kept level.   The above picture shows the CD/DVD tray 4. Press the [Resume/Cancel] button on the device to continue. If the above solution  hs not resolved your error please...